TURBINE OIL FILTRATION

TURBINE OIL FILTRATION

TURBINE OIL FILTRATION

Your content goes here. Edit or remove this text inline or in the module Content settings. You can also style every aspect of this content in the module Design settings and even apply custom CSS to this text in the module Advanced settings.

A typical hydraulic system-

The resultant is –

  • Oil quality of >NAS 14
  • Moisture in Oil
  • Hydraulic Component Malfunction / Failure
  • Oil Replacement
  • Frequent Downtime

Note: Pl note that pressure line & return line filter of ‘X’ micron rating with ‘Y’ beta ratio “DO NOT” deliver NAS / ISO quality oil in the tank.

Fluent Power

Ultimate Filtration solution for Turbine Oil- an off line filtration trolley to achieve your “DREAM” oil quality.

FLUENT POWER SOLUTION

  • Maintain desired NAS during Operations
  • NO or Zero hydraulic Component Failure
  • Multifold Oil Life
  • Increase Hydraulic component Life
  • No Moisture Removal

Quality Guarantee:

  • Particulate < NAS 4 (ISO 15/13/10)
  • Moisture(Dissolved)< 200ppm

Custom Design Lube Oil Skid for Turbine Lubrication

VATS offers anAbsorber which will remove water / moisture from organic solvents, fuel, oils, etc. up to 68 cst.

VATS Absorber HOLDS the moisture elements and chemically bounds the molecules so as the organic fluid is free from moisture.

Key Feature –

  • Highest quality
  • Lowest electrical consumption
  • 10 times faster than nearest competition.
  • Stainless Steel Housing
  • Trolley Mounted
  • With Smart Controller (IOT enabled controller available)
  • Add-on Feature Varnish removal/control
  • Control for any emergency


VATS manufacture its own filter cartridges, and we have developed high efficiency special graded density depth filters for the application. The high dirt holding capacity with moisture separator helps the cartridges last much longer before they need to be replaced.
The filtration systems, using these cartridges, are also designed as extremely compact, quick connect machines.

Turbine Oil

Contamination of this turbine oil, by particulate matter and moisture, is the main cause of any failures or under-performance of this system. It is hence essential that these contaminants are kept below a certain level AT ALL TIMES.

All systems typically use an online filter in the return oil line. This filter is expected to be replaced after a specified period of operation. But even this may not be enough, and the entire oil in the system needs to be replaced after regular intervals. It is often observed that the top up or refill done in the field using fresh barrel oil, does not measure up to the purity standard expected, and the system resumes operation with an initial load. 

Oil Purity: The NAS numbers

Oil Purity is typically represented by its NAS number, which is a measure of particulate contamination, indicating the number of particles found across different sizes.

Hydraulic systems, depending upon the criticality of the operation, specify the limiting NAS levels, which typically would range for NAS 7 to NAS 4 ( NAS 7 contains 8 times the contamination, compared to NAS 4). Filter replacements and oil changes happen during maintenance, and the NAS levels then could be as high as 12 to 14. This means that the system typically is subject to a much higher average NAS level during the operation.

Ensure health of oil.

13 + 8 =

Increase Productivity.

VATS Filtration Technologies Pvt. Ltd.

3rd floor, Sankalpgad Apartment,
Plot No.25, Suvarnabaug Colony,
Kothrud, Pune-411 038, INDIA

020-25471966 |  +91 8888861782

Email id : info@vatsfilters.com

Ensure health of oil.

12 + 4 =

Increase Productivity.

VATS Filtration Technologies Pvt. Ltd.

3rd floor, Sankalpgad Apartment,
Plot No.25, Suvarnabaug Colony,
Kothrud, Pune-411 038, INDIA

020-25471966 |  +91 8888861782

Email id : info@vatsfilters.com

Ensure health of oil. Increase Productivity

Advantages of LUCIDA®, ABSORBER

Highest Water Removal

Can deliver quality < 100 ppm

High Life​

Wide range of Applications



Benefits of LUCIDA®, ABSORBER

Quick & Easy Fitment

Fast Water separation

Low Cost of operation





Typical Applications

Hydraulic Oil​

Transmission Oil​

Low Viscosity Washing Fluid, Solvents​

And Many more​




Advantages of LUCIDA®, ABSORBER

Highest Water Removal

Can deliver quality < 100 ppm

High Life​

Wide range of Applications



Benefits of LUCIDA®, ABSORBER

Quick & Easy Fitment

Fast Water separation

Low Cost of operation





Typical Applications

Hydraulic Oil​

Transmission Oil​

Low Viscosity Washing Fluid, Solvents​

And Many more​




Get in Touch

Copyright: VATS Filtration | Developed by: nimble e-solutions