ENGINE OIL

ENGINE OIL

Engine Test Rig

Application- During Petrol or Diesel engine manufacturing during actual hot test oil is filled in the engine and tested for specific duration.

Current Scenario

During Hot test of Engine dust, grease, graphite, sealant, moisture, etc. is released along with these contamination carbon soot during actual hot test is mixed in the Engine oil. This oil is re used for subsequent engine test applications resulting into gradually increment in contamination.
At some point of time oil is so much contaminated that it is not wise to use this dirty oil. And eventually it calls for replacement of oil.

Resultant of current practice (Problem / Issue)

After engine testing oil is drained. Some oil is left out in the engine say 200 ml to 2 lit which is approximately some % of total required oil. This residual oil is retained in the engine is responsible for contaminating first fill oil during final assembly.
And finally resulting in (a) Reduction in performance (b) component failure, during Warrantee Period..

Solution from Vats-

VATS Fluent Total filtration systems enable you to test every engine with oil which is better than virgin oil. With Fluent Total input for testing is with desired quality of NAS / ISO/ mg/lit.
Note: For your existing test rig tank Fluent AE models can be attached as external fitment to achieve your dream mg/lit quality

VATS Commitment

  • Quality to desired mg/lit
  • No Oil replacement
  • Lowest cost /lit for filtration

Ensure health of oil.

11 + 4 =

Increase Productivity.

VATS Filtration Technologies Pvt. Ltd.

3rd floor, Sankalpgad Apartment,
Plot No.25, Suvarnabaug Colony,
Kothrud, Pune-411 038, INDIA

020-25471966 |  +91 8888861782

Email id : info@vatsfilters.com

Ensure health of oil.

2 + 14 =

Increase Productivity.

VATS Filtration Technologies Pvt. Ltd.

3rd floor, Sankalpgad Apartment,
Plot No.25, Suvarnabaug Colony,
Kothrud, Pune-411 038, INDIA

020-25471966 |  +91 8888861782

Email id : info@vatsfilters.com

Ensure health of oil. Increase Productivity

Advantages of LUCIDA®, ABSORBER

Highest Water Removal

Can deliver quality < 100 ppm

High Life​

Wide range of Applications



Benefits of LUCIDA®, ABSORBER

Quick & Easy Fitment

Fast Water separation

Low Cost of operation





Typical Applications

Hydraulic Oil​

Transmission Oil​

Low Viscosity Washing Fluid, Solvents​

And Many more​




Advantages of LUCIDA®, ABSORBER

Highest Water Removal

Can deliver quality < 100 ppm

High Life​

Wide range of Applications



Benefits of LUCIDA®, ABSORBER

Quick & Easy Fitment

Fast Water separation

Low Cost of operation





Typical Applications

Hydraulic Oil​

Transmission Oil​

Low Viscosity Washing Fluid, Solvents​

And Many more​




Get in Touch

Copyright: VATS Filtration | Developed by: nimble e-solutions