ENGINE OIL
ENGINE OIL
Engine Test Rig
Application- During Petrol or Diesel engine manufacturing during actual hot test oil is filled in the engine and tested for specific duration.
Current Scenario
During Hot test of Engine dust, grease, graphite, sealant, moisture, etc. is released along with these contamination carbon soot during actual hot test is mixed in the Engine oil. This oil is re used for subsequent engine test applications resulting into gradually increment in contamination.
At some point of time oil is so much contaminated that it is not wise to use this dirty oil. And eventually it calls for replacement of oil.
Resultant of current practice (Problem / Issue)
After engine testing oil is drained. Some oil is left out in the engine say 200 ml to 2 lit which is approximately some % of total required oil. This residual oil is retained in the engine is responsible for contaminating first fill oil during final assembly.
And finally resulting in (a) Reduction in performance (b) component failure, during Warrantee Period..

Solution from Vats-
VATS Fluent Total filtration systems enable you to test every engine with oil which is better than virgin oil. With Fluent Total input for testing is with desired quality of NAS / ISO/ mg/lit.
Note: For your existing test rig tank Fluent AE models can be attached as external fitment to achieve your dream mg/lit quality
VATS Commitment
- Quality to desired mg/lit
- No Oil replacement
- Lowest cost /lit for filtration
Ensure health of oil.
Increase Productivity.
VATS Filtration Technologies Pvt. Ltd.
3rd floor, Sankalpgad Apartment,
Plot No.25, Suvarnabaug Colony,
Kothrud, Pune-411 038, INDIA
020-25471966 | +91 8888861782
Ensure health of oil.
Increase Productivity.
VATS Filtration Technologies Pvt. Ltd.
3rd floor, Sankalpgad Apartment,
Plot No.25, Suvarnabaug Colony,
Kothrud, Pune-411 038, INDIA
020-25471966 | +91 8888861782
Ensure health of oil. Increase Productivity
Advantages of LUCIDA®, ABSORBER
Highest Water Removal
Can deliver quality < 100 ppm
High Life
Wide range of Applications
Benefits of LUCIDA®, ABSORBER
Quick & Easy Fitment
Fast Water separation
Low Cost of operation
Typical Applications
Hydraulic Oil
Transmission Oil
Low Viscosity Washing Fluid, Solvents
And Many more
Advantages of LUCIDA®, ABSORBER
Highest Water Removal
Can deliver quality < 100 ppm
High Life
Wide range of Applications
Benefits of LUCIDA®, ABSORBER
Quick & Easy Fitment
Fast Water separation
Low Cost of operation
Typical Applications
Hydraulic Oil
Transmission Oil
Low Viscosity Washing Fluid, Solvents
And Many more
Get in Touch
Copyright: VATS Filtration | Developed by: nimble e-solutions