Automobile

Test Rig Oil Applications

Fluent total product for recirculating test rig oil to maintain desired quality NAS, mg/lit, etc. throughout service life

Typical Applications:

  • Transmission Test rigs
  • Gear Box Test rigs Low viscosity Flushing, High Viscosity testing
  • Hydraulic Cylinders, Component test rigs
  • Diesel / Petrol Engine Test rig oil filtration

End of the line Flushing / Pre Delivery Inspection (PDI) Filtration

Current Practice:
Every Gear Box, transmission engine, etc. before dispatch needs testing. With continuous testing oil become contaminated, and after some times needs replacement

Resultant of current practice (Problem / Issue):
After testing some oil is left out in the system (residual Oil) say 500 ml to 3 lit which is approximately 3 to 10% of required oil. This residual oil is retained in the gearbox, transmission valve, etc. and is responsible for contaminating first fill oil and finally resulting in component failure during Warrantee Period

Solution from Vats:

Vats End of the line filtration systems enables you to test every component with oil which is better than virgin oil. With fluent total input for testing is with desired quality of NAS / ISO / mg/lit.

Vats End of the line Dynamic Flushing filtration systems ensures you:
(1) Testing with desired quality OIL and
(2) Ensures that residual oil in the system is left out at your desired quality of NAS / ISO / mg/lit.

Resulting into almost no claim for bearing, control valve, seal failure during warranty period.

Vats Solution – A complete solution Fluent PDI:

  • Vehicle Identification – Bar code / QR code / RFID scanning
  • Draining, Acknowledgement
  • Transfer to Filtration
  • Dispensing the required quantity as per model
  • Quality Certificate Note (QC Pass)
  • Data acquisition and monthly reporting

Neat Cutting Oil application

Current Practice:
Every application adds load to need tutting oil and ultimately increases contamination in oil. With continuous engressement of contamination, after some times needs replacement of oil.

Resultant of current practice (Problem / Issue):
Contaminated particle oil is an extra abrasive substance. Resulting into
(1) Disturbing surface finish, RA value, Quality
(2) Increases Tool Dracing Frequency
(3) Overall reduction in productivity
(4) Overall increase in Cost

Solution from Vats:
Fluent Regen – A Re-Generable filtration system up to 1 micron For Neat Cutting Oil, Honing Oil, Grinding Oil, etc.

Filtration System - Schematic Diagram

Filtration System

Maintains the oil quality to your desired level with NO consumable cost *
* Expected life of media from 3 to 5 years.